top of page

Resolute Premium UV DTF Part A adhesive & Part B laminate 100m x 35cm Media Rolls.

High-Tac adhesive and a super flexible clear carrier laminate application media make this DTF UV media one of the easiest to use. The high-tac adhesive reacts quickly once rubbed delivering permanent results on most products. At 35cm width this media allows for a full Sra3 sheet of transfers to be printed. The adhesive is 5mm less each side than the carier sheet allowing for 34cm print width.


Please note: This product may not be dishwasher safe and should be washed by hand or cold.


Please watch the application video for correct product application.



R-Jet PRO DTF UV Media

  • Are products decorated using the R-Jet PRO DTF UVi combined with Resolute consumables dishwasher safe?

    In a nutshell yes, but there are some things you need to take note of.

    • The substrate (product being decorated) must be suitable.
    • You must perform your own tests on each product before stating it is dishwasher safe.
    • Extra cleaning products over the normal wash cycle can make the product fail.
    • Only wash on normal, not extra power wash or high heat.
    • Do not apply to areas that will come into contact with liquid or food (the inside of a glass or mug, or the surface of a plate to be used for food).
    • Wipe the surface to be decorated with an IPA wipe to remove grease, then buff dry with a lint free cloth before applying.
    • The substrate must be at room temperature before application or not below 18c.
    • We have done tests up to 25 washes using two products from Ikea which have not changed during the tests.
    • This media is not suitable for the dishwasher, please order our UV X media which has a stronger adhesive.

    You must make your own wash tests on the products, as all dishwashers are different there are no gurantees this product is 100% dishwasher safe. Should a decorated product fail, Resolute accept no liability for the print, the product or any loses incurred. 

bottom of page