Auto Opening Electro Magnetic Heat Press

Instructions and safety information

Before use

• Read the supplied user manual fully and follow its setup, operating and maintenance instructions.

• Place the table on a level, stable floor, engage its wheel brakes if fitted, and check that it cannot roll during use.

• Position the heat press correctly on the table and make sure the suction cups are seated and holding securely before operating.

• Allow at least 190 cm of working height with the press on top, and check overhead clearance for the open press.

• Keep the press and its cables away from water, walkways and anything that could be damaged by heat.

During use

• The heat platen and nearby machine parts become hot and can cause burns. Keep hands clear of the platen and closing mechanism, and use suitable heat-resistant protection when handling hot items.

• Keep children, pets and bystanders away from the working area. Do not leave the machine unattended while hot or operating.

• Use the pull-out bed to load and position garments or transfers, keeping fingers clear of moving parts.

• Use settings appropriate for the transfer and material, and follow their manufacturers’ instructions.

• Work in a suitably ventilated area.

After use and maintenance

• Switch the machine off and unplug it when it is not in use. Allow hot parts to cool before cleaning, moving or storing the equipment.

• Inspect the power cable and plug regularly. Stop using the machine if you notice damage, unusual operation or a fault, and contact a qualified technician.

• Do not dismantle or repair the press unless you are qualified and authorised to do so.

• The machine is heavy. Use at least two people and safe lifting practices when moving or unpacking it; follow the manual’s instructions for any movement