R-Jet PRO DTF V4 Purifier Replacement Filter Set

Keep your R-Jet PRO DTF V4 purification system operating effectively with this genuine replacement filter set.

The set is designed for the R-Jet PRO DTF V4 Single Chamber Purifier and includes the two replaceable filtration elements used by the system:

• A main filter unit for capturing airborne particles and contaminants.

• An activated carbon filter bag for helping to reduce odours and certain airborne fumes.

Regular filter replacement helps maintain airflow, filtration performance and a cleaner working environment. The set is suitable for smaller and medium-sized DTF production setups using the compatible V4 purifier.

This is a replacement consumable set only. The purifier itself is not included.

Instructions

• Switch off the purifier and disconnect it from the electrical supply.

• Allow the purifier and filters to cool before opening the unit.

• Open the purifier access panel according to the equipment operating instructions.

• Remove the used main filter unit carefully, avoiding unnecessary disturbance of accumulated dust.

• Remove the used activated carbon filter bag from its filter compartment.

• Check the filter compartments and remove any loose dust or debris using a suitable method.

• Install the replacement main filter unit in the same orientation as the original.

• Install the new activated carbon filter bag securely in its designated position.

• Check that both filter elements are seated correctly and that no gaps or loose edges are visible.

• Close and secure the access panel before reconnecting the purifier.

• Switch on the purifier and check that airflow is unobstructed and that there are no unusual noises or warning indications.

Do not operate the purifier without the required filter elements correctly installed.

Safety information

• Disconnect the purifier from the power supply before replacing filters.

• Wear suitable gloves and respiratory protection when handling used filters, particularly if they contain accumulated DTF powder or other contaminants.

• Avoid shaking, brushing or blowing used filters, as this may release trapped particles into the working environment.

• Do not wash, dismantle or reuse the main filter unit.

• Do not open or cut the activated carbon filter bag.

• Keep replacement and used filters away from children, food and drink.

• Dispose of used filters in accordance with local waste-disposal requirements and any applicable workplace procedures.

• Do not use this filter set in a purifier model other than the compatible V4 unit.

• Replace filters when airflow is reduced, extraction performance decreases, the filter becomes visibly loaded, or the purifier indicates that servicing is required.

• This filter set supports filtration but does not remove the need for suitable workplace ventilation, safe powder handling and appropriate personal protective equipment.